General
The buckle on my Flex 4 seat back and webbing need replacing. Where do I order these parts?
HI If your buckle looks like this: you will need a new buckle https://boutiqueborealdesign.com/products/cam-buckle-with-strap-19-mm If the Screw, washer & nut are are not in serviceable / reusable shape, then should also order: 1 x ...
How do I remove and re-assemble the footrest assembly on my BorealDesign kayak?
It is recommended that you remove the pedal to check which screw is loose. 1) To do this you need to remove the block at the front of the track (closest to the seat). 2) Use a 4 mm Allen Key wrench to do this. 3) Slide the pedal out and the inside ...
Why does may kayak always keep turning to one side?
In a bit of wind, kayaks will always turn to one side. The kayak often turns to the direction of the wind which is natural. Sailboats will do this also. This is known as weathercocking. You need to use your paddle to steer or rudder to counteract ...
Where can I buy parts for my Cobra Kayak?
We stock and sell many of the Cobra Kayaks parts at our Boutique Boreal Design site and ship to North American and Internationally too. Alternatively you may find parts at TopKayaker.com who also ship internationally. If you do not find what you are ...
My rudder on my Pedal Kayak is very hard to pull up and down. What can I do about this?
For a sticky rudder issue, when the uphaul and downhaul rope is very hard to pull, the best fix is to replace rope with smaller diameter rope such as 3mm or 4mm nylon rope. Hope that helps,
Is it possible to open up a Beluga bilge pump and clean it out? I have some small rocks inside.
It is not recommended to open up the hand pump but see if the rocks or debris can be flushed out with water, high pressure hose or a pressure washer maybe Hope this helps,
What paddle length should I choose?
Choosing a paddle is largely a matter of personal preference. Ranging from 200 cm to 250 cm, paddle length depends on the height of the person and the width of the kayak. The taller the person is, and the wider the kayak is, the longer you’ll want ...
How to install and replace the steering handle and cables.
Installing your Steering Handle is super easy. See the video here. Replacing your steering handle kit with the cables for rudder control is pretty straight forward but does take a bit of time and some tools: You will need: Small multihead screwdriver ...
Setting Up Your Pedal Kayak
We know you are excited to get out on the water with your new pedal kayak. Here are some Getting Started Resources to get you on your way faster: Download the attached Assembling Your Drive, Seat and Rudder for Mako Kayaks( see below) Watch Assembly ...
I own a Riot whitewater kayak. Is there an owners manual for my kayak?
See link at bottom to view and download the Riot Whitewater Owner's Manual from 2008. Works fairly well for info on current (since we have not changed them much) and older model (discontinued) kayaks.
How do I repair and glue the window back in place on the Riot Intrigue?
The material of the window is plexiglass and the size is 1220*2440*4mm (if needed to replace it) To seal it you can use the glass glue to seal the window.: Glass Glue, Adhesive for Acrylic, for bonding Between Glass, Acrylic and Other Material Such ...
The skeg does not deploy or lower all the way on my Boreal Baffin, Labrador or Pakesso kayak. How do I fix this issue?
Making an adjustment to your skeg line so it lowers all the way is relatively easy to do. 1) Use tape to secure the skeg so does not fall down; 2) Go to the Skeg-Dial Control, carefully pick off the small black cap cover (it is glued with silicone), ...
How to repair and replace the rudder pedal support flanges on a thermoformed ABS kayak
This article and attached file with video walks you through the steps to replace and install new flanges to attach your kayak pedals to in a thermoformed ABS kayak for Boreal Design or Riot Kayaks. Tools Needed: Tape (any will do but suggest painters ...
How to find the right size skirt or cockpit cover for my kayak
Find the size of sprayskirt or cockpit cover you will need for your Riot Kayaks, Boreal Design, Azul Kayaks or many other brand kayaks that our products fit. Please download and view the file attached at the bottom of this article. Purchase ...
How to adjust the foot pedals on the Riot Kayaks Polarity 16.5 tandem kayak
In this quick video we show you how to adjust the foot pedals on the Riot Kayaks Polarity 16.5 tandem kayak. 1. Push down on the tab and slide the pedal forward or back 2. Once you reach the desired position, release the tab and the foot pedal will ...
How to install the rudder on a Riot Kayaks Polarity 16.5 tandem kayak
The installation of the rudder on a Riot Polarity 16.5 tandem kayak is pretty straight forward following these steps and by watching the video below. Tools: Star head screwdriver (or star head bit for your drill) Small pliers or wrench for ...
How do I order scupper plugs for my sit on top Riot or Azul Kayak
There are different variations and sizes of scupper plugs the Riot and Azul Kayaks. For Azul Sit-On-Top Sun series of single and tandem kayaks you can order that plug here For Riot Escape 9 series kayak you'll need the Large size ones here - sold ...
Kayak parts retail price list may help in finding the right part for your kayak
If you need more help in finding the right part for your kayak,, you can download and view the attached Retail Parts Price List (link at bottom of this page). Once you know the name of the part you can then look it up in our store here and order ...
How to destroy a kayak for warranty replacement purposes
During the warranty replacement process, we may ask you to destroy your defective kayak and take pictures to send us of proof of this. Cutting the bow or stern off the kayak is the best way to destroy kayak using hand saw or power tool saw as shown ...
How to fix bulkheads on thermoformed ABS kayaks
If you are experiencing the issue of the bulkhead becoming separated or unglued on your Thermoformed ABS kayak, there is a relatively easy fix following these steps and with white Sikaflex marine caulking. The following article explains the steps, ...
What is the difference between a rudder and a skeg? Which is better?
Skeg – A skeg lowers into the water along the axis of the kayak, improving the straight-line tracking of your kayak in certain conditions, but has no ability to control directional changes. Rudder – A rudder helps straight-line tracking, but being ...
What is the difference between the types and categories of kayaks?
Kayaks can be broken down into two types (sit-in, sit-on-top) and six basic categories (recreational, day-touring, sea, whitewater, fishing, pedal kayaks): Sit-in – Traditional enclosed kayaks with a cockpit opening. Sit-on-top – Open kayaks without ...
What are some suggestions for adjusting my kayak outfitting for the best fit?
Your position and comfort in the kayak play a huge role in the enjoyment of your time on the water. The three main contact points between you and your kayak are your buttocks, thighs, and feet. Proper kayak outfitting maximizes contact with all three ...
I am having trouble fitting my rubber hatch on my kayak. What do I do?
Sometimes the rubber hatches are a bit difficult to put on the hatch rim. The fit is tight so that if forms a good seal to prevent water from entering the kayak. The best way is to: Start on one side pushing hatch down and running your hand along ...
How do I assemble and install my Riot, Azul or Beluga J-Cradle Kayak Carrier on my roof rack?
in this 4 min video we show you the parts and steps needed to assemble and mount your two kayak cradles on your roof racks. For demo on how to tie the kayak on to a cradle please check out the last part of this video and skip to min 5:00: ...
How to set up and use your Azul, Riot or Beluga Car Carry Kit
In this 5 min video we show you the contents, set up and use of the car carry kit to tie your kayak onto the roof of your car securely. This kit can be used in conjunction with your roof rack or directly on your car. The car carry kit is perfect for ...
How do I set up and use my Riot, Beluga, Azul Kayak/Canoe Sail ?
In this short 5 min video, we show you how to set up your sail on your canoe or kayak to use it to sail downwind. We also show you how to fold it up and store it again after. Sail downwind easily with your kayak or canoe. Has the power to pull along ...
Looking for seat and foot brace hardware for Riot whitewater kayaks (Magnum, Thunder, Astro)
The knob kits (sets of 4) for seat and foot pedal adjustments can be purchased here online and shipped to you. https://boutiqueborealdesign.com/products/knob-kit-m6-female-includes-4-knobs
How do set up and adjust my Flex Sit On Top Seat on the Escape 9, Escape 12 and Escape Duo?
We show you in this short video how to install your Flex Sit On Top (SOT) seat on a sit on top kayak. For this video we are using the Riot Kayaks Escape 9 model which comes with SOT seat included but needs a quick and easy set up. Other models using ...
The screw to install the pedals on my Impulse Drive is stuck / threads are stripped. What do I do?
1) Notify us here of this issue and parts you need and then follow the following steps: Important: Left side of drive is a reverse thread, Turning to the right loosens it and left tightens it. 2) Use Allen key tool provided or vice grips to remove ...
What is a Prop 65 or Proposition 65 warning for plastic kayaks sold in USA?
This warning is required by State of California for state retailers or those that ship direct to a seller from out of country or out of state. The warning is required by law for any product that may emit harmful chemical exposure. Plastic kayaks ...
How to assemble and adjust your 2 piece paddle (Beluga, Riot or Boreal Design)
In this short video we show you how to put together and adjust and set the correct length you want on your Beluga, Riot Kayaks or Boreal Design paddle.
How do I replace a foot pedal on a Riot Brittany kayak to make it rudderless?
Please download the following document below for the steps to replace the foot pedal (s) on a Riot Brittany Kayak. 1) Remove the cable from the rudder and the rudder and store. 2) Take out the old footrest by unscrewing both bolts on the side 3) ...
How to adjust the rudder support when it is crooked
In this brief article we show you how to re-align a mis-aligned or slightly crooked rudder bracket / rudder mount. You can also download this as a document to print out and refer to as well below.
How do I obtain a MSO (Manufacturer's Statement of Origin) to register my kayak in my country or state (including those that need it for motorized canoe and kayak purposes) ?
If you have purchased a new kayak from us, the MSO (Manufacturer's Statement of Origin) should have been included along with your guide to register your kayak and visit our Owner's Centre online. If you have misplaced your MSO, please download a new ...
How can I mount deck accessories on my kayak especially those for fishing and kayak angling?
There are lots of ways to customize your kayak with after market add ons like camera, fishing rod, cell phone, gps navigation holders, anchors, outriggers, and much more. Here are some good resources to guide you in the process of intalling them ...
How to install a kayak rudder support
in this article and attached powerpoint slide set with videos we show you how to install the rudder support mount for your Boreal Design or Riot Kayak. See interactive powerpoint file attached that has videos embedded. Parts include 2 short ...
How to Assemble and Use A Sit On Top Kayak Cart
We show you in this clip how to assemble and then use your Riot Sit-on-top Kayak Cart to help you transport your kayak to the water and back. View and shop for it online here: https://boutiqueborealdesign.com/products/riot-sit-on-top-buggy
How do I install a Flex 4 Seat in an ABS thermoformed plastic Riot or Boreal Design kayak?
In this video we show you how to install a new Flex 4 Seat in your ABS Thermoformed Riot or Boreal Design kayak. Maybe you are upgrading or replacing your existing seat, you will be sure to enjoy the comfort and ease of adjustment of a new Flex 4 ...
How do I install a Flex 4 Seat in a rotomolded plastic Riot or Boreal Design kayak?
In this video we show you how to install a new Flex 4 Seat in your Riot or Boreal Design kayak. Maybe you are upgrading or replacing your existing seat, you will be sure to enjoy the comfort and ease of adjustment of a new Flex 4 seat. Parts ...
Next page