How do I remove and re-assemble the footrest assembly on my BorealDesign kayak?
It is recommended that you remove the pedal to check which screw is loose.
1) To do this you need to remove the block at the front of the track (closest to the seat).
2) Use a 4 mm Allen Key wrench to do this.
3) Slide the pedal out and the inside stopper track also.
4) Then can inspect the screws that hold the whole assembly in place and tighten or replace as necessary.
5) To re-assemble the foot track do the same steps as above i reverse order.
Please download check the disassembly and assembly instruction video clips at the bottom of this article page.
Below is the tool,4mm Allen wrench:
Related Articles
How do I replace a foot pedal on a Riot Brittany kayak to make it rudderless?
Please download the following document below for the steps to replace the foot pedal (s) on a Riot Brittany Kayak. 1) Remove the cable from the rudder and the rudder and store. 2) Take out the old footrest by unscrewing both bolts on the side 3) ...How to repair and replace the rudder pedal support flanges on a thermoformed ABS kayak
This article and attached file with video walks you through the steps to replace and install new flanges to attach your kayak pedals to in a thermoformed ABS kayak for Boreal Design or Riot Kayaks. Tools Needed: Tape (any will do but suggest painters ...How do I adjust my kayak foot rests or foot pedals?
Adjustable via a locking rail or webbing system, properly adjusted footbraces increase your kayak stability and control. Certain models of footbraces control the kayak’s rudder. A properly adjusted footbrace should allow your knees and thighs to fit ...I have a problem with my skeg. How do I repair / replace a skeg on my Riot kayak?
In this quick video we show you the steps to replace your skeg on your Riot Kayak. Skeg replacement kits are available to purchase and ship to you here: https://boutiqueborealdesign.com/search?q=skeg+kit https://youtu.be/lmaqmN_Mhg0 1. Take out the ...How do I assemble the Beluga Kayak Boat Roller?
Please see the attached document for steps in assembling your Kayak Boat Roller with instructions for use with pictures. Stay tuned for the product video next!