I need to replace the rudder cable on the Riot Edge 14.5. What parts do I need?

I need to replace the rudder cable on the Riot Edge 14.5. What parts do I need?

HI 

you will likely need about 3 meters of this cable.  

Best to measure the other non--broken cable first. 

You may need these pieces to create and hold the loops needed at the pedal and rudder end too.  


Hope this helps, 



    • Related Articles

    • Kayak parts retail price list may help in finding the right part for your kayak

      If you need more help in finding the right part for your kayak,, you can download and view the attached Retail Parts Price List (link at bottom of this page).    Once you know the name of the part you can then look it up in our store here and order ...

    • Replacing Riot Skeg and Rope Line

      Hi, Please download the instructions for replacing the skeg rope line on a Riot Kayak below. Please check inside the skeg box to verify that the mount is still present (small box with a spring). If it is, you will only need the possibly the blade ...

    • How to install a kayak rudder support

      in this article and attached powerpoint slide set with videos we show you how to install the rudder support mount for your Boreal Design or Riot Kayak.    See interactive powerpoint file attached that has videos embedded.  Parts include 2 short ...

    • How do I replace a foot pedal on a Riot Brittany kayak to make it rudderless?

      Please download the following document below for the steps to replace the foot pedal (s) on a Riot Brittany Kayak.  1) Remove the cable from the rudder and the rudder and store.  2) Take out the old footrest by unscrewing both bolts on the side 3) ...

    • How to install the rudder on a Riot Kayaks Polarity 16.5 tandem kayak

      The installation of the rudder on a Riot Polarity 16.5 tandem kayak is pretty straight forward following these steps and by watching the video below.  Tools:   Star head screwdriver (or star head bit for your drill) Small pliers or wrench for ...