How do I install a Kayak Wall Rack?
Please view / download the PDF instructions below for guidelines on how to install your Kayak Wall Rack.
Some overall guidelines are:
• You want a minimum of 15 inches (38 cm)of kayak to extend over the racks on each side. There are no set rule so find the studs in walls in the 6-7 foot (182-213 cm) apart area.
• Note: Ideally want to anchor screws into a wood stud or support for best results and maximum load bearing.
Related Articles
How to install the rudder on an Azul Tasman tandem kayak
The installation of the rudder on an Azul Tasman tandem kayak is pretty straight forward following these steps and by watching the video below. Tools: Star head screwdriver (or star head bit for your drill) Small pliers or wrench for tightening ...How to install the rudder on a Riot Kayaks Polarity 16.5 tandem kayak
The installation of the rudder on a Riot Polarity 16.5 tandem kayak is pretty straight forward following these steps and by watching the video below. Tools: Star head screwdriver (or star head bit for your drill) Small pliers or wrench for ...How to install a kayak rudder support
in this article and attached powerpoint slide set with videos we show you how to install the rudder support mount for your Boreal Design or Riot Kayak. See interactive powerpoint file attached that has videos embedded. Parts include 2 short ...How to install your Riot Mako Kayak adjustable seat kit
In the rare event that your Riot Mako Kayak seat is slightly too wide to fit and be installed into the tracks follow the steps in this video to install the Adjustable Seat Kit. In this video below we show you how to replace the 4 seat attachments ...How do I set up and install the Flip Drive or the Impulse Drive for the first time in my Riot Kayak Mako 10 Versa?
In these two short videos we walk you through the easy set up and install your pedal drive in the Riot Mako 10 Versa kayak. If the tracks to hold the drive are not installed we show you how to install these also as your first step. Flip Drive ...